Stop choosing between stability and suspension freedom. SDI E-LINK automatically locks and unlocks the sway bar through the E-CLIK Trail, Desert, and Dune terrain modes, giving your CFMOTO ZFORCE Z10 the articulation it needs over rough terrain and the stability it needs while cornering, carving, and side-hilling.

• Automatic sway bar engagement through E-CLIK
• Trail, Desert, and Dune-specific operation
• Improved suspension articulation over rough terrain
• Reduced body roll during cornering and side-hilling
• Manual Lock and Unlock control through the E-CLIK touchscreen
• No need to stop and manually connect or disconnect the sway bar

Fitment: 2026+ CFMOTO ZFORCE Z10 and ZFORCE Z10-4.

Important: Integration with an SDI E-CLIK system is required for automatic terrain-mode functionality.

Transform the factory electronic shocks on your 2026+ CFMOTO ZFORCE Z10 or Z10-4 into a true semi-active suspension system. E-CLIK continuously adapts compression damping to vehicle movement and terrain while retaining the factory switches for instant 25% firmer or softer adjustments.

• Converts factory three-level electronic shocks into semi-active suspension
• Trail, Desert, and Dune terrain modes
• Factory switches function as E-CLIK Racer Switches
• Instantly adjust compression 25% firmer or softer
• Clean, simplified installation

Fitment: 2026+ CFMOTO ZFORCE Z10 and Z10-4

Take direct control of the front sway bar on your CFMOTO ZFORCE Z10 with the SDI E-LINK Switch System. Lock or unlock the front sway bar from the cab for improved stability when engaged and increased front suspension articulation when disengaged.

• Front sway bar control from an in-cab switch
• Lock or unlock the system on demand
• No need to stop or manually disconnect sway bar hardware
• Improved stability and reduced body roll when locked
• Increased front suspension articulation when unlocked
• Red blinking switch indicates when E-LINK is unlocked
• Operates independently without E-CLIK

Fitment: 2026+ CFMOTO ZFORCE Z10 and ZFORCE Z10-4.

Configuration: Front sway bar only.

Take direct control of the rear sway bar on your CFMOTO ZFORCE Z10 with the SDI E-LINK Switch System. Lock or unlock the rear sway bar from the cab for improved stability when engaged and increased rear suspension articulation when disengaged.

• Rear sway bar control from an in-cab switch
• Lock or unlock the system on demand
• No need to stop or manually disconnect sway bar hardware
• Improved stability and reduced body roll when locked
• Increased rear suspension articulation when unlocked
• Red blinking switch indicates when E-LINK is unlocked
• Operates independently without E-CLIK

Fitment: 2026+ CFMOTO ZFORCE Z10 and ZFORCE Z10-4.

Configuration: Rear sway bar only.

SDI Aluminum Reservoir Cap for Fox Shocks (Black)

- Motocross inspired extended reservoir cap
- Increases volume, helping keep the shock cooler
- Replaces the prone to leaking rubber filling needle with a standard schrader valve, making it easier to service
- Sold Individually

SDI Aluminum Reservoir Cap for Fox Shocks (Grey)

- Motocross inspired extended reservoir cap
- Increases volume, helping keep the shock cooler
- Replaces the prone to leaking rubber filling needle with a standard schrader valve, making it easier to service
- Sold Individually

SDI Accessory Mount - License Plate Holder

The SDI Accessory Mount System offers ultimate flexibility and modularity for individuals to build the mount they want. 

Highlights:

• Completely Modular Design – Build what you need
• Innovative Mounting – Designed to rotate on impact
• Adaptive – Available for 1.5” & 1.75” Tubing
• Multipurpose Clamping System – 7 Different Accessories utilize the same mounting point
• Flexible – Twenty preset pivot positions allow accessories mount at various angles
• Easy to Install
• Made in the USA

SDI Accessory Mount - Registration Sticker Plate

The SDI Accessory Mount System offers ultimate flexibility and modularity for individuals to build the mount they want. 

Highlights:

• Completely Modular Design – Build what you need
• Innovative Mounting – Designed to rotate on impact
• Adaptive – Available for 1.5” & 1.75” Tubing
• Multipurpose Clamping System – 7 Different Accessories utilize the same mounting point
• Flexible – Twenty preset pivot positions allow accessories mount at various angles
• Easy to Install
• Made in the USA

SDI Accessory Mount - Clamp

The SDI Accessory Mount System offers ultimate flexibility and modularity for individuals to build the mount they want. 

Highlights:

• Completely Modular Design – Build what you need
• Innovative Mounting – Designed to rotate on impact
• Adaptive – Available for 1.5” & 1.75” Tubing
• Multipurpose Clamping System – 7 Different Accessories utilize the same mounting point
• Flexible – Twenty preset pivot positions allow accessories mount at various angles
• Easy to Install
• Made in the USA

SDI Accessory Mount - Hook Accessory

The SDI Accessory Mount System offers ultimate flexibility and modularity for individuals to build the mount they want. 

Highlights:

• Completely Modular Design – Build what you need
• Innovative Mounting – Designed to rotate on impact
• Adaptive – Available for 1.5” & 1.75” Tubing
• Multipurpose Clamping System – 7 Different Accessories utilize the same mounting point
• Flexible – Twenty preset pivot positions allow accessories mount at various angles
• Easy to Install
• Made in the USA