E-LINK Switch System for CFMOTO ZFORCE Z10 – Front

On-Demand Front Sway Bar Control for the CFMOTO ZFORCE Z10

The SDI E-LINK Switch System gives you direct control over the front sway bar on your CFMOTO ZFORCE Z10 or ZFORCE Z10-4. Lock or unlock the front sway bar directly from the cab without stopping, exiting the vehicle, or manually disconnecting suspension hardware.

Lock the front sway bar when additional stability and body control are needed. Unlock it when the terrain demands greater independent front suspension movement and articulation.

Designed for drivers who prefer direct control instead of automatic terrain-mode operation, the Switch E-LINK system delivers the performance benefits of electronic sway bar control through a simple in-cab switch. A red blinking indicator lets the driver know when the front sway bar is unlocked.

Switch-Based Front Sway Bar Control

The E-LINK Switch System replaces the factory front sway bar links with electronically actuated E-LINKs. The driver can change between locked and unlocked operation using the included in-cab switch.

• Locked: Connects the front sway bar for improved stability and reduced body roll.
• Unlocked: Allows greater independent front suspension movement over uneven terrain.
• Visual Indicator: The red blinking switch indicates when the E-LINKs are unlocked.
• On-Demand Control: Change the front sway bar setting without leaving the driver’s seat.

Stop Choosing One Fixed Sway Bar Setup

Fixed front sway bar links force a compromise between stability and suspension articulation.

A connected front sway bar improves body control during cornering, carving, side-hilling, and higher-speed driving. However, it can limit independent front suspension movement over rocks, ruts, chop, and uneven terrain.

Unlocking the front sway bar allows the front wheels to move more independently, helping the suspension follow rough terrain. The tradeoff is increased body movement during cornering and other off-camber conditions.

The E-LINK Switch System allows you to choose the setting that best matches the terrain directly from the cab.

How the E-LINK Switch System Works

The system uses electronically actuated front sway bar links controlled by an in-cab switch.

When the E-LINKs are locked, the front sway bar functions like a traditional connected sway bar system. This improves body control and reduces vehicle roll during cornering and higher-speed driving.

When the E-LINKs are unlocked, the front sway bar releases and allows greater independent wheel movement. This improves front suspension articulation over rocks, ruts, transitions, and uneven terrain.

• Electronically actuated front sway bar links
• Direct control through an in-cab switch
• Locked and unlocked operating positions
• Red blinking indicator when unlocked
• No tools or manual link removal required

Lock the Front Sway Bar for Stability

Lock the E-LINKs when the ZFORCE Z10 needs additional body control and stability.

• Higher-speed driving
• Cornering and carving
• Side-hilling and off-camber terrain
• Hard directional changes
• Situations where reduced body roll is preferred

Unlock the Front Sway Bar for Articulation

Unlock the E-LINKs when the terrain requires greater independent front suspension movement.

• Rocky or deeply rutted trails
• Uneven technical terrain
• Straight-line chop and transitions
• Low-speed obstacles
• Situations where maximum front suspension articulation is preferred

Clear In-Cab Status Indicator

The included switch provides control of the front E-LINK system and clearly communicates its current status.

• Use the switch to lock or unlock the front sway bar
• The red indicator blinks when the E-LINKs are unlocked
• Quickly confirm the sway bar setting from the driver’s seat
• No need to inspect the links outside the vehicle

No E-CLIK System Required

The E-LINK Switch System operates independently and does not require an SDI E-CLIK suspension system.

This version is manually controlled by the driver and does not automatically change sway bar behavior through Trail, Desert, or Dune terrain modes. Drivers who want automatic terrain-mode integration should select the E-CLIK-integrated E-LINK system.

• Independent switch-controlled operation
• No E-CLIK ECU or touchscreen required
• No terrain-mode programming required
• Direct driver control at any time

Front-Only Configuration

This system controls the front sway bar only. It is designed specifically for drivers who want on-demand control of front sway bar engagement without adding a rear E-LINK system.

• Front electronic sway bar links
• Front sway bar lock and unlock control
• Vehicle-specific switch and wiring
• Designed for the ZFORCE Z10 front suspension

What’s Included

• Front E-LINK electronically actuated sway bar links
• In-cab control switch
• Switch indicator lighting
• Vehicle-specific wiring harness
• Required electrical connectors
• Vehicle-specific mounting and installation hardware

Why Choose the E-LINK Switch System?

• Direct control over front sway bar behavior
• Locks or unlocks from inside the cab
• No need to stop and manually disconnect hardware
• Improves body control when locked
• Increases front suspension articulation when unlocked
• Red blinking indicator shows when the system is unlocked
• Operates independently without E-CLIK
• Front-only configuration
• Designed specifically for the CFMOTO ZFORCE Z10 platform

Vehicle Fitment

Fits:

• 2026+ CFMOTO ZFORCE Z10
• 2026+ CFMOTO ZFORCE Z10-4

Configuration: Front sway bar only.

Frequently Asked Questions

Resources

Download Installation Instructions

Need help confirming compatibility or choosing between the Switch and E-CLIK-integrated E-LINK systems? SDI suspension specialists are available before and after your purchase.